-
I connect an other Raspberry PI 3 to the HDMI CSI Adapter and the USB Cable, but the mouse latency is around 5 to 20 seconds, so not usable by Webinterface and VNC Client too.
Even changing screen …
-
I just installed ustreamer today on raspberry pi to address issues with mjpg-streamer and multiple cameras. Unfortunately, I get the error of the wrong jpeg library.
```
/ustreamer --device /dev/v…
-
**Describe the bug**
After updating the kernel from version 4.19.118 to 5.4.35 an attempt to get an image from the tc358743 device ~~twice in a row (reopen device file)~~ results to I2C timeouts. In …
-
Hi,
I had the stream working for all day, and tonight it crashed. I tried to stop and start it again and now it still crash (loop) :
```
=======================================================…
lbr38 updated
4 years ago
-
Mjpg streamer failing with select timeout at random time and its such pain, because camera controlling laser cutter. Tried ustreamer, output as follows:
sudo ./ustreamer --host=0.0.0.0
-- INFO [6…
-
There seems to be an issue where nginx will report "
### Repro steps
1. Start a TinyPilot device normally
1. `sudo service tinypilot restart`
1. Visit
### Expected
TinyPilot web interfa…
-
http://beefy9.nyi.freebsd.org/data/113amd64-default/523997/logs/ustreamer-1.11.log
I recall that we had a conversation that ```WITH_PTHREAD_NP=0``` vs. ```WITH_PTHREAD_NP=1``` is clearly incompatib…
-
Hello, i can't start the ov2710 camera. What am I doing wrong ? Thank you.
**lsusb**
`ID 0c45: 6368 Microdia`
**./ustreamer --device /dev/video0 -r 1920x1080 -f 30 -m JPEG**
```
- INFO [45…
-
#### What were you doing?
Trying to watch the webcam stream on Raspberry Pi 4 with VL805 firmware 0x000137ab.
Webcam: "ID 1871:0141 Aveo Technology Corp. Camera"
It worked before. Now it doesn't wo…
-
Hello!
Would it be possible to add some alternate options for the "blank" JPG configuration?
A few ideas:
1) Allow the internal blank "NO SIGNAL" image to be generated at a resolution matching…