-
dmesg's from different test
-
After testing in a debian environment per port power control was fully functional. -f was required however as the device lists the hubs as not having power management options.
Currently using this …
jsv93 updated
9 months ago
-
Hi, I have a 1$ aliexpress tag but don't understand how to flash openhaystack firmware.
Any help?
-
### Describe the bug
I did read the solved and related issue [#13427](https://github.com/openwrt/openwrt/issues/13427)
Experiencing the same problem with my new ZBT-WE3526 router. 5G Wifi signal s…
-
### Describe the bug
I have a very power hungry USB NVMe enclosure+NVMe, and I have issues booting properly.
As per [documentation](https://www.raspberrypi.com/documentation/computers/raspberr…
-
Someone opened a case in openwrt for this issue but i think its firmware related problem and better here.
```
[ 10.127699] mt7986-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20220…
-
### Describe the bug
防火墙的硬件流量分载好像是默认启用的,但是好像并没有生效(测速时占用CPU),ppe的bind里也没有连接
```
root@ImmortalWrt:~# cat /sys/kernel/debug/ppe*/bind
root@ImmortalWrt:~#
```
在openwrt的main分支上硬件流量分载是生效的,测速时无CPU占…
-
Hey, I build a sweep keyboard v2 but it only works the half connected to the USB. I have a TRRS cable but it didn't work. I have tested the continuity of the holes of the TRRS jack in the PCB and I fo…
-
I have tried to perform the hack on my YI Dome U Pro 2K cam (which is h60ga) twice, but in both cases I ended up bricking it. The second time I have applied the hack while the cam was connected to Put…
-
as in the Tittle:
Woth two router Tenbay T-MB5EU cannot use in 5GHZ master slave
Error is only **between i**n the 2 * box's
**In console : wlan1: failed to insert STA entry for the AP (erro…
F5BJR updated
3 years ago