-
Hi,
i changed the config and made the changes as described but run now into issues. I am using platformio VS Code. What is wrong?
---------------
Resolving esp32-s3-devkitc-1 dependencies...
Pla…
-
Currently we use the name of the board profile directory to give some clue to users what is the purpose of that defconfig, i.e.: nsh, usbnsh, netnsh, timer, kostest, etc.
But in some case it is not…
-
Hi
I tried to use an Lora Example provided by heltech on arduino IDE.
Somehow my Boards keep crashing with a checksum error:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x5 (DSLEEP),bo…
-
PlatformIO can't create a new project with board lilygo-t-display-s3, framework Espidf. The choice of board doesn't seem to matter, but if the framework is Espidf then it fails. The error is always on…
-
### Describe the bug
The ESP23-S3 boards - I've checked several to be sure - will not flash with ESPresense despite flashing with the similar online flasher for Tasmota. The chip seems to erase and…
-
### Related area
USB HOST MSC
### Hardware specification
ESP32-S3, ESP32-S2
### Is your feature request related to a problem?
I WOULD TRIED ALL TINY-USB AND USB MSC CODE FOR DEVELOPMENT BUT I CAN…
-
Currently, my sliders only change their value when I release screen.
As far as I understand sliders, they send an LV_EVENT_VALUE_CHANGED on LV_EVENT_RELEASED but also when a drag is detected, so to…
-
I've built the Micropython binary and flashed it to a T-Display S3. I can run simple programs, but have no idea where to start to drive the LCD. I see there is an `lcd` module available, but have no i…
-
sir,
Thank you very much for your contribution.
I have two ESP32 development boards，esp-wroom-32 and esp32 s3. esp-wroom-32 can be used very well.
but esp32 S3 , I can't use it. I confirm I …
-
Hi Roland,
when I was trying to flash Heltec Wifi_Kit_32_V3.1 with `spidr_1.1.ino.heltec_wifi_kit32_V3.bin` via Chrome and web.esphome.io, the device does not boot. The log shows "SHA-256 comparison…