-
## Version of the custom_component
v0.5.0
## Configuration
```yaml
Add your logs here.
```
## Describe the bug
I charge my EV that it is set to 80% charging limit. Once it g…
-
### The problem
After setting up this integration i got errors and no entities. I strictly followed the instructions when setting up the Intehration.
I can't tell if it's a bug or an incompatibility…
owstr updated
1 month ago
-
Hallo,
ich dachte mir nun auch, ich wage den Umzug von 1.9 auf 2.1.3. Leider funktioniert direkt nach der Installation der Touch meines internen Displays nicht mehr. **_Also nur der Touch, die Anzeig…
-
Hey GD
Not sure if the API will allow this, but when charging is there anyway to grab the kW being sent to the car?
Use case is when using excess solar, would be useful to see how much kW is bei…
-
This command `18.10.16 Stop Charging` has to be used to set the stop charging status after it was
requested by the status message `Stop Charging Requested`.
The status message `Stop Charging Reque…
-
Why does the WB board communicate with controller in EVSE mode but not in EV mode using FreeV2G?
I use a recent WB carrier board EI 1.1 and the current FreeV2G to implement a EVSE to EV test setup.…
-
[output.log](https://github.com/Sevenstax/FreeV2G/files/13659406/output.log)
[3.zip](https://github.com/Sevenstax/FreeV2G/files/13659422/3.zip)
Hi!
My setup is:
Platform: EVSE
Firmware Versio…
-
### OCPP Version
OCPP2.0.1
### Describe the bug
We noticed the following issue with our Tarragon platform and EVerest core 2024.05. In case we connect an EV (CP state B) and reboot the charge contr…
-
### Describe the bug
After stopping the charging process on our Hyundai Kona in Min+PV mode (stopped by setting charge mode to "Off" in the UI), I unplug the cable from the car first, and then from t…
-
If Pv_opt has scheduled an "SOC hold" in the final slot allocated in an Intelligent Octopus Go cheap rate, the inverter is left in Backup/Reserve (Mode 49) and is never clears back to Timed Charge/Dis…