-
### Describe the bug
Adding the following to /etc/config/wireless causes radio initialisation to fail without any obvious error message:
option txantenna '1'
2.4G Radio doesn't appear to send o…
-
编译时添加了gre grev6还有kmod-gre,kmod-gre6
之后在network中如下新增接口，重启服务或者重启机器后，无法在shell下使用ip add查看到接口
config interface 'ip6gre10'
option ip6addr ' FC00:1::0'
option peer6addr 'FC00:2::0'
option mtu '1400…
-
When I configure the usb wireless card from MediaTek Inc. AP mode at 5GHz and connect to it with my phone,it show the connect speed is 866Mbps on my phone.But from the luci interface,the connection sp…
-
```
FreeBSD FBSD_13 13.0-CURRENT FreeBSD 13.0-CURRENT #20 r348589: Mon Jun 3 19:02:30 EDT 2019 root@FBSD_13:/usr/obj/usr/src/amd64.amd64/sys/MYKERNEL amd64
panic: page fault
GNU gdb (GDB) 8.3…
-
Hi,
the last commit introduce these files:
Source1: 60-ipu6-tgl-adl.rules
Source2: ipu-setlink
but they are'n uploaded into git repo?
Thank you for working into this integration for Fedor…
-
*glycoknob:*
Stock LEDE - r4099-4c3953b
Plain UML images are fine and work. If you want to build images with the imagebuilder the default package list is not honored and modules are missing - lik…
-
*mhegab:*
Archer C7 V2, running release 18.06.01
Having kmod-fs-ntfs and ntfs-3g packages installed. When I try to mount a FAT32 partition using the following command:
mount -o "rw,sync" "$(blkid…
-
*glycoknob:*
Stock LEDE - r4099-4c3953b
Plain UML images are fine and work. If you want to build images with the imagebuilder the default package list is not honored and modules are missing - lik…
-
Hi there,
I tried to use (kmod) spi-gpio-custom but I can't opkg it, I just saw it's not on the repo. As i2c-gpio-custom is in, would it be possible to add the same for SPI ?
thank you for your help…
-
### Describe the bug
I have a D-link DIR-620 A1 (Ralink RT3052 id:1 rev:3) and I needed to connect a flash drive.
However, the flash drive is not detected in the system.
Sda or sda1 does not appe…