-
Hi,
First of all it seems to be really something incredible!!
I load my first custom sensor with the bme680 code on my esp8266 and add the knxprod to my ETS.
Now I would try to configure it by …
-
Currently packets are limited to 64 byte length. DPT24 allows strings with greater length.
J-N-K updated
5 years ago
-
I tried to compile this version, and got the following error:
Arduino: 1.8.8 (Windows 10), Board: "Generic ESP8266 Module, 80 MHz, Flash, ck, 26 MHz, 40MHz, DOUT, 1M (no SPIFFS), 2, v2 Higher Bandwi…
-
sonoff/esp-knx-ip-send.cpp:136:22: error: invalid operands of types 'double' and 'int' to binary 'operator&'
Please take a few minutes to complete the requested …
-
I am working on a code in which the main engine is based on [example_telegram_monitor.py](https://github.com/XKNX/xknx/blob/master/examples/example_telegram_monitor.py). During the monitoring of the b…
-
It is desirable to monitor for Scene messages that are broadcasted on the KNX bus. In my example I have wall switches in the bedroom and hallway which triggers KNX scenes (turn off all lights in the h…
-
Sonos mentions: "tts.mp3F=/data/public/2.mp3" is not availabe
Which is completely correct. Only "/data/public/2.mp3" is available for playback ;-)
What means from Sonos side: http://duffstation:18…
-
Latest one: https://github.com/openhab/openhab-distro/issues/927#issuecomment-507705390
-
**Description of problem:**
I have a humidity sensor that sends onto the KNX bus every 10 sec. This works fine and is also picked up fine in Home-Assistant.
However, the sensor is not displayed …
-
Hello, how can I set an IP address for a KNX/IP gateway? It's not found automatically. Also does the telegram monitor support non-group telegrams?