-
I'm building with PlatformIO, so that could be the source of my issues.
This is targeting SAMD51, using Feather M4 Express
Under the normal build configuration, the framework is archived:
`Archivin…
-
Hi, I've been recently working with the ATSAMD51 and come to test it with some FRAM. However, it seems like the hardware spi mode has some issues.
- Arduino board: ItsyBitsy M4 (SAMD51)
- Ardui…
-
Hi! i'm not really good with embedded systems and may be missing something silly. I've been following the instructions in README.md
Here is my rust version:
```
>> rustup show
Default host: x…
-
Hello,
Trying to use the script in OSX to compile the firmware to try linear advance and getting sed errors.
sed: 1: "Marlin/platformio.ini": invalid command code M
-
On the Circuit Playground Express, after running a CircuitPython program, access to the REPL is lost. Ctrl+C stops execution and the serial connection remains, but there's no way to regain the REPL pr…
-
What kind of issue is this?
- [ ] **Question**.
This issue tracker is not the place for questions. If you want to ask how to do something,
or to understand why something isn't working…
-
So, I have a Sparkfun ESP32 Thing, and am trying to use it as if it were a flash drive. Let me explain what I mean. So, basically I want a drive named MY_ESP_DRIVE or something. Then I put file ```a.p…
-
Building either an empty sketch or the blinky example from the Arduino IDE gives a build error in the Robohat MM1 libraries.
Here's the full error output.
```
Arduino: 1.8.11 (Windows 10), Boar…
-
I posted about this here [CircuitPython program prevents drive from mounting](https://forums.adafruit.com/viewtopic.php?f=60&t=165589) and mentioned on discord, but am not sure that the right develop…
-
Hi Chris,
I created this issue based on the comments in issue #21 and issue #11
The instructions to get the board up and running with Marlin are obsolete. Here are the specifics that need to be…