-
```
If the stepper doesn't complete a full resolution or goes for long periods of
time between steps or steps over a long period of time, it gets really hot
due to a bug in the stepper code. It leav…
-
Right now the position of the stepper motors is only written to flash memory after setup, which means changes to the position made during operation are lost if the power is cut or a restart happens.
…
-
Is it possible to use all the features of TMC2209 straight from an Arduino Uno or an ESP32 (classic)? Or is an extra motor controller (such as the CNC shield)?
And if extra hardware is necessary, why…
-
```
Hi,
thanks for pyduino. I'm using it successfully on Linux with my Arduino
(Duemillanuove) and extended it to support stepper motors (by adding some extra
sysex commands to the firmata protocol)…
-
```
Hi,
thanks for pyduino. I'm using it successfully on Linux with my Arduino
(Duemillanuove) and extended it to support stepper motors (by adding some extra
sysex commands to the firmata protocol)…
-
I'm using a Sidewinder X1 and Repetier Server!
Before installing the S42B there was no problem to change the filament during a print.
When I hit PAUSE the nozzle would raise 5mm and X/Y would home! …
-
```
If the stepper doesn't complete a full resolution or goes for long periods of
time between steps or steps over a long period of time, it gets really hot
due to a bug in the stepper code. It leav…
-
```
If the stepper doesn't complete a full resolution or goes for long periods of
time between steps or steps over a long period of time, it gets really hot
due to a bug in the stepper code. It leav…
-
```
If the stepper doesn't complete a full resolution or goes for long periods of
time between steps or steps over a long period of time, it gets really hot
due to a bug in the stepper code. It leav…
-
Hi. In this project I use 28BYJ-48 5V stepper motors and its rotary too slow. However in another project they work fast.
What variables need to be changed in the code to increase the rotation speed?
…