-
Hi, I tried building drawbot from the tutorial. Unfortunately motors only vibrate. I rechecked hardware (swapped CNC shield, couple of arduinos, drivers, motors). Apparently, the problem is software b…
-
```
What steps will reproduce the problem?
Ethernet shield + DHCP. If the DHCP server gives you lease with "infinite"
lease time (0xFFFFFFFF) the method calculating rebind time (_dhcpT2 = _dhcpT1
-
I am trying to the use a USB Host shield with an Arduino Uno, but when I run the board_qc it gets stuck at
Checking USB device communication.
Waiting for device...
I have a bluetooth dongle …
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
Hey.
I use Arduino Uno with cnc shield and DRV8825. I connected motors. I have problem with motors. Axis X doesn't work. Y works well. Z axis works only in one direction. I tried to change cnc shield…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
## Description
Library does not compile on Arduino Nano RP2040 Connect.
Problem is very similar to [#37](https://github.com/PaulStoffregen/CapacitiveSensor/issues/37) , but solution does not work …