-
Is that possible while only using FOSS?
ghost updated
8 months ago
-
### Describe the bug
Failure while building (current git, gcc-12 on AlpineLinux and ArchLinux):
```
rstrip.sh: /usr/src/openwrt/build_dir/target-x86_64_musl/linux-x86_64/packages/ipkg-x86_64/kmod-f…
-
Dear Bruno,
my congratulations for squeezing a RV32I core into the Icestick !
I read your Verilog files with joy and I wish to share an idea on how to save a few more LUTs for more peripherals: …
-
After following page 19 of the "getting started..." guide, I'm trying to use openocd on my installation for the pico and get the following error:
pen On-Chip Debugger 0.10.0+dev-gf8e14ec-dirty (202…
-
### Distribution
Ubuntu 22.04
### Architecture
amd64
### Kernel version
6.5.0-35
### IMSProg version
commit 0573530
### Bug description
cmake ask sudo passwrd
```
~/build/IMSProg/IMSProg/IM…
-
### Describe the bug
Hello,
I have a JHEF405 GF16 FC and a betafpv M03 VTX, and I can't seems to make smartaudio working between the two. This is somewhat problematic as this vtx don't have other me…
-
### Describe the bug
FC BetaFPV F405 2-3S 20A V1.0 FC, barometer not showing up in 4.5 but showing up in 4.4.1
Already add custom define BARO_DPS310, set BARO_CS to same pin with 4.4.1, set baro bus…
-
Hi, I can't find an ATF1508AS-7AX100. Is it possible to use an ATF1508ASL-25AU100 TQFP100 instead, that is the only one I found? Or are there any other IC's that I can use?
-
I try to run a quick smoke debug test against spike, by running `make`, but it seems that the openocd cannot connect to the target:
the log is as follows:
```
Test: CheckMisa
Target: spike64
…
-
Has any work been done towards modifying the FW or writing your own?
We just had a discussion about unsupported chips in https://github.com/vdudouyt/minipro/issues/90 and came to the conclusion th…