-
## Intro:
Some (older) MFDs can not show our webassembly version / gui-v2. Details of that are here: https://github.com/victronenergy/gui-v2/issues/909.
The tech used for showing gui-v1 is VNC. …
-
I added _dictionary.pfsense_ to the dictionary directory and registered it in the _include section of dictionary file_ but the attributes specified for pfsense e.g _pfSense-Bandwidth-Max-Up_ are not r…
-
Hi @MSe1969,
thanks for this repo.
I successfully compiled 19.1, including "overlay-204-android-GrapheneOS".
But it is not clear to me how to enable grapheneos capative portal.
Redme says:
"e…
-
### The problem
When using the Pulse Counter Sensor pullups are active and can't be disabled (pullup: false does not do anything either).
If I configure the same Pins as simple binary sensor pullups…
-
![Min - Gabriel carries Muhammad over the Mountains](https://user-images.githubusercontent.com/96326382/192279724-a7a4cf2a-a4a8-4287-9f11-2d5465619e19.jpg)
-
### The problem
I am using the `fastled_clockless` platform with a `WS2812B` chipset on both esp32 and esp8266. With both devices I get the following issue:
Let's assume I use the following min…
-
-
## Description
Generally speaking we need to update the error page communication to omit mentions of the Chrome brand, chrome support links and chrome iconography across the board. This encompasses …
-
Everytime I hit the "Toggle" button, it switches between the two ports in rapid succession, rather than staying on the next port.
Logs via ESPHome:
```
[D][button:010]: 'Toggle HDMI Port' Pre…
-
> Have you searched for existing (open and closed) issues describing the same problem?
Yes, but there wasn't anyone with the same problem.
**Describe the error**
The ESP8266 resets every ~8 sec…