-
I am following the CircuitPython repo and was directed here by your issue about esp32 and native modules. One of the projects on my todo-list is about fractals and I was wondering how much performance…
-
Hi, just a question.
IN the README I see that kodi on the 5.7.x compiles and works, but with limited decoding capabilities.
Can you elaborate more on that? I'd like to understand what it means and…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
paging @shadow578
These two functions not found:
```r
HAL/HC32/HAL.h:122:9: error:…
-
```
[nikll@nikll ~/LogicDiscovery ]$ gmake
--
-------- begin --------
arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 4.8.3 20131129
(release) [ARM/embedded-4_8-branch revision 205641]
Copy…
-
```
[nikll@nikll ~/LogicDiscovery ]$ gmake
--
-------- begin --------
arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 4.8.3 20131129
(release) [ARM/embedded-4_8-branch revision 205641]
Copy…
-
I have a custom nRF52810 based board connected via ST-Link v2 programmer. I have attempted using boards _Generic nRF52_ and _nRF52 DK_. Theoretically the nRF52810 should be identical to the nRF52823 o…
-
The GitHub instructions as to configure VESC boot loader via ARM10.2.1 is not fully compatible with chibiOS2.6.6 zip download as bldc-bootloader-master zip. The newer OS3.0.5 has a completely differen…
GI101 updated
3 years ago
-
hello,
how to use MPU6050 dmp6 without an IRQ pin?
I don't have free GPIOs on my M4 board any more (Adafruit Feather).
Instead of IRQ, I want to repetitively read i2c data in the loop() either if n…
-
I know this might be a bit over the top for Signet, but I dare to ask anyway.
Is Signet so ambitious, that it could be used also for PGP or similar? This basically boils down to the question if the…
-
## Introduction
Currently the `Message` trait is defined like this
```rust
pub trait Message
where
Self: Sized,
{
fn message_id(&self) -> u32;
fn message_name(&self) -> &'stati…