-
There appears to be an issue with ADC calibration or operation. (Reported by @ladyada)
-
I am attempting to use a hal InputPin my with feather_m0 but am getting an error.
```
let mut peripherals = Peripherals::take().unwrap();
let mut parts = peripherals.PORT.split();
let mut in_pin…
-
Hi,
I checked out TinyGo yesterday and noticed a problem that all constants from the `machine/board*` files are not available. I am using the Feather M0 so it's a samd21 chip. How can I enable that…
-
Hello! I'm wondering if you have an example of how to setup SPI.
The feather_m0 board that I've used previously has a helper for setting up the master. Maybe something similar could be added here. …
-
Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.
Press any key to enter the REPL. Use CTRL-D to reload.
Adafruit CircuitPython 4.1.2 on 2019-12-18; Adafruit Itsy…
-
I have a sketch that is working with the lmic Version 3.0.99 perfectly fine.
Console out:
12:41:58.372 -> EV_TXSTART
12:41:58.372 -> Message Code: 17
12:42:03.500 -> EV_JOINED
12:42:03.500 -> M…
-
I am using v2.3.1 of LMIC library and 0.5.2 of this library with MachineQ LoRaWAN service. I can see the Join MAC requests in the serial stream and the MachineQ sending a join accept. Yet, the device …
-
I'm really new to embedded so keep that in mind.
Would this be able to make use of this board https://www.adafruit.com/product/3010 and make use of the wifi?
Thanks!
-
I currently have two Feather M0 Express boards both running without a Boot-Loader as I am programming and debugging via SWD.
1)Original Feather: Uses standard fitted memory.
2)Modified Feather: Or…
-
I've successfully tested this with Arduino nano.
I'm trying to get it to work with an Adafruit Feather M0 (with native USB), but no luck.
Both boards are running the same code, but I cannot esta…