-
**Is your feature request related to a problem? Please describe.**
No
**Describe the solution you'd like**
Add K1 and K1 Max to the Creality section, hopefully with G-codes that will continue usi…
-
-
### What happened?
Not all macros from my macros.cfg are available in KS. They are NOT hidden in KS macro settings. For example this UNLOAD_FILAMENT macro is nowhere to be found in KS but normally av…
-
### Fluidd Version
1.25.0
### Browser
Firefox
### Device
Desktop PC
### Operating System
Windows
### What happened
Updated Fluidd on two different Pi setups.
After the UI reset, the Camera…
-
***Scenario:***
Bed Mesh leveling with a rectangular pattern instead of square.
***Problem:***
With a rectangular bed the mesh leveling graph seems to show the axes incorrectly _(wider bed shows …
-
### Fluidd Version
v1.25.2-e06c7ad
### Browser
Chrome
### Device
Desktop PC
### Operating System
Windows
### What happened
When the extruder uses TMC2240, the hotend temperature is covered by…
-
**Describe the bug**
=======================
After installing Mainsail OS, emptying the ~/printer_data/config folder, using the git-method for retrieving and installing the SV06-plus configuration, …
-
### Discussed in https://github.com/xblax/flashforge_adm5_klipper_mod/discussions/15
The integrated buzzer should be usable for the mod, i.e. to notify print end or errors.
This could be done vi…
xblax updated
8 months ago
-
When trying to connect to printer with ip address at set up, moonraker returned with "error connecting to"
Address I'm using is http://192.168.1.5 with standard port 7125 and set up all on sonic p…
-
## Version of the moonraker integration
0.10.0
## Describe your setup
Printer: Sovol SV06
Klipper Host Hardware: Raspberry Pi 4b
OS: PiOS / Debian Bullseye 64bit
Klipper Version: v0.11.0…