-
```
What steps will reproduce the problem?
1. Connect server and client in a 1GBit Switch
2. Start both servers (fakewww and web100)
3. Set the following tcp paramters in client.
echo 1 > /pr…
-
```
What steps will reproduce the problem?
1. Connect server and client in a 1GBit Switch
2. Start both servers (fakewww and web100)
3. Set the following tcp paramters in client.
echo 1 > /pr…
-
While trying to register flask service, Eureka client tries to get ipv4 with this code:
` def ipv4(self):
if self.system == 'Darwin':
ipv4 = getoutput("ifconfig " + self.ifac…
-
It will be great to see a tumbler at the web interface to turn on and off the internet connection for the scan.
I suppose, you can turn on/off it in drakrun/main.py file using ifconfig vif manipula…
-
For some reason, be it my network or otherwise, I see dhcpd does not fail on startup of the installer, and that it seemingly completes. Upon running ifconfig, I do not have an ipv4 address, which mean…
-
I have a lagg network setup on my FreeBSD server that binds four NICs. When I use this network as the bridge in BVCP, I don't have connectivity on VMs using this network. Ideas?
-
```
Which device (manufacturer, type)?
Droid Incredible
Which firmware is installed?
CyanogenMod 7
What version of wireless tether are you using?
2.0.7 (also tried 2.0.8b)
What steps will reproduce…
-
1. 修改 lan 口配置，会导致wifi关闭。解决方案，添加开机运行命令，只要不小心修改配置导致wifi关闭，就重启一次路由器。
```
/etc/rc.local
ifconfig ra0 up #启用2.4G
ifconfig rai0 up #启用5G
mtkwifi reload #应用新配置
```
-
Hello
I installed the Ubuntu system on an SD card, and I took all the steps to install p…
-
I think this should be possible but just do not have the time to look right now.