-
The 3D-Step files make up the biggest majority of the current official pool. To be a little bit more precise roughly three quarters:
![image](https://user-images.githubusercontent.com/6620266/15492…
atoav updated
2 years ago
-
I have been experiencing this issue for a while but only just been able to reproduce it.
- I'm not sure it's down to Sway but it seems likely.
- It isn't due to CPU usage.
- I can't produce the …
cedws updated
5 months ago
-
Hello phdlee,
I discovered your firmware here on github almost by chance. since I have a k5 dedicated to testing and a si4732 in the drawer, I'll try to put it in place of the original chip! I just h…
-
When you search for '100 0402' or '100 0402 resistor', thousands of results appearing in the result box.
![Screenshot_20211029_155648](https://user-images.githubusercontent.com/8972552/139397507-e7d…
-
More of a long-term wish. This came up again and I finally found a library that appears usable for our purpose: https://github.com/stepcode/stepcode. Its license is 3-clause BSD and the build system i…
-
[bug-demo.zip](https://github.com/MitjaNemec/ReplicateLayout/files/15125237/bug-demo.zip)
Before replication:
After replication:
Steps to reproduce:
* Open the attached bug demo pr…
-
Now *.sch files are classified as Eagle files.
-
Hi, and thanks for sharing your work !
I was gifted a [Chinese copy of the EleksTube](https://www.ipstube.com/en/product/IPStube-401.html), and decided to see if I could reverse-engineer it. Doing …
-
in my current pcb Project I have moved the component outline + designator text to F/B.Fab Layer.
If I now would like to only show the mounted components, this is only possible if the pads are displ…
-
```
The slowness seems to come from the populate_footprint_list function. I added some log statements to print the execution time whenever the function was called. Here are some measurements I got in…