-
I'm using linknx to send multiple commands directly one after another.
When I'm sending 6 KNX messages at the same time, only the first 3 ones get sent and the other 3 are lost.
The issue happens wi…
-
Hi,
I installed the smarthomeNG pi image and I upgraded knxd to the latest version (0.11.17). If I connect with ETS 5 and I use the multicast mode I can send and receive telegrams. Everything is w…
-
Hallo zusammen,
Nachdem der Winter eingekehrt ist, ist mir neulich aufgefallen, dass mein Aussentemp-Sensor immer einen Fehler meldet. Ich gehe schwer davon aus, dass es an den negativen Temperatur…
-
Inject string:
{"dstgad":"0/1/0","dpt":"1","value":0}
8-11-2016 19:55:00Nieuwe KNX OUTmsg : string [75]error calling groupAddrSend: TypeError: Object � has no method 'writeIntLE'
8-11-2016 19:55…
-
Hello,
I've downloaded and installed knxd on my pi2, but it seems not to work, have an ABB IP interface.
This is the information I get:
pi@pi2:/ $ knxtool groupswrite ip:192.168.178.200 1/1/7 0
Open…
-
I use currently knxd with a rapberry pi.
3 years ago i used openWrt with eibd of TU Wien and i had a ntpd installed. While the ntpd was unsafe, some guys have hacked the openWrt and they reprogrammed …
-
I'm posting this as a discussion topic for an issue I've been having personally to see if it's been a problem for anyone else.
I have my personal homebridge running on an old Mac Mini with about a do…
-
Reported by @onkelandy:
* [x] query result is None if last log value was written before the query timeframe:
When querying db('avg','10i','now') and there is no value in the log for that period (jus…
-
I have a bridge running, with 97 devices.
I store 1 variable globally, of all states of the devices, so the `get` of `Characteristic.On` just uses that variable, no server request required.
In my …
-
When trying to use the latest master an assertion is triggered on first connection attempt from ETS 5 group monitor.
I was able to finally pin it down to this line:
https://github.com/knxd/knxd/blo…