-
What is the reason that an abstract template binding specification is necessary? Would it not be simpler to just create specification(s) with concrete bindings to the small number of web protocols tha…
-
I have installed the node-red plugin from the master branch but I have multiple issues.
At one point I was able to get it to connect and receive incoming telegrams just fine. However, after a few sec…
-
Hy everybody!
I'm running ha-bridge in a container (installed from aptalca/home-automation-bridge), no physical hue-Bridge in my home.
So far ha bridge is running, AIexa Echo (2nd gen) is shown i…
-
Sometimes when i open the Home app, all device are in "updating" status, like freezed for abount 30-50 sec... or tell that no one accessory is responding, and after one second everithing works again..…
-
I'm running knxd with options:
--eibaddr=0.0.127 --client-addrs=0.0.2:8 -d -D -T -S -i -f9 -t1023 -b ipt:192.168.x.x"
When my window shades change position the position status (dpt 5.001) is writt…
-
Hello,
I am using items with DPT 9.007 (relative humidity in %).
## Expected Behavior
value of 44% is shown as 44%
## Current Behavior
value of 44% is shown as 0.44%
## Possible Solution…
-
### ISSUE DESCRIPTION - TROUBLESHOOTING
Error compiling 6.6 on VS Code
### REQUESTED INFORMATION
**FAILURE TO COMPLETE THE REQUESTED INFORMATION WILL RESULT IN YOUR ISSUE BEING CLOSED**
…
-
## Expected Behavior
Limit the number of simultaneous connections to the KNX/IP router
## Current Behavior
I don't know how to investigate in detail, but from what I suspect is that KNX creates…
-
Arduino IDE 1.8.9
Sonoff-Tasmota version 6.5.0
ESP8266 Board version 2.5.0
When compiling the sketch I get an error:
```
sonoff:2704:35: error: 'TimeReached' was not declared in this scope
…
-
I want to implement information that automatically reads some addresses from the knx bus at regular intervals.
respect