-
I have a problem most likely in the driver rtl8812au version 5.6.4.1. I have 2 AWUS036AC one is used for hostapd v 2.9 the other is put into monitor mode. After reboot OS (debian, ubuntu, kali) hostap…
-
Platform: server 2.1.3 running on Ubuntu 16.04, GUI 2.1.3 running on macOS.
To replicate:
* Load topology with IOSv and IOSvL2 devices (shutdown)
* Select `Tools > Import/Export Node Configs > …
-
After stopping service systemd.resolved, I get a complete os crash and the following kernel dump trying to run start_flash, which is shown in my syslog:
```Nov 5 17:45:06 localhost kernel: [ 220.59…
-
### Describe the bug
hi , when my router ( nanopi r1 ) reboot , wifi is not associated and radio is not active
When I edit and want to enable it, it is still disabled and it doesn't work. I tested…
-
## Issue description
I want to spawn a nixos-container that gets an IP via DHCP in the same network as my notebook (as it was connected to the same switch).
This works with VMs in VirtualBox usi…
-
I had a small talk with a Qemu maintainer, and he recommended me to remove the direct use of the Qemu option for support and instability reasons. He suggested me to use libvirt.
-
When I change the Web-GUI port to :80 in the config, the GUI does not work. I guess it is because user 520 does not have the permission... Could be useful to enable it.
-
### Problem description
Chronyd execution failure causes boot to fail, but only after the first boot.
### Expected behaviour
The behaviour should be consistent between the first boot, and sub…
-
The following commands are needed to allow traffic when firewalld is being used.
````
sudo firewall-cmd --add-service=dhcp
sudo firewall-cmd --add-service=dns
sudo firewall-cmd --add-masquerade
…
-
I use esp32 spi interface to connect to rpi.The esp32 connected wifi sucessfully,but it cannot get ip from dhcp.
`
pi@raspberrypi:~/esp-hosted/host/linux/host_control/python_support $ python sta…