-
### Description
I am using a BIQU SKR, as well as the latest Marlin 2.0 and config for the Anycubic Linear Plus. The Fysetc RGB LCD screen I have connected works properly unless printing the first …
-
I ve tried to get the module to work with tft35 but no luck,all my configurations are correct"i think" the baud rate is 115200 on board,tft35 and the module but i cant get it to passthrought to work p…
ghost updated
4 years ago
-
So, I've got two different MKS sbase boards. One of which I've used with smoothie for well over a year now, the other was an unused backup. Every commit of marlin I've tried over the last month has ha…
-
Hi, developers,
I'm using latest firmware 1.0.1 for TFT70. Inside "Home" button, there is a button to disable steppers (last button), but It's not working. Within 1.0.0 version this was working (us…
-
Hello!
I am trying to change the filament using the M600 command without an LCD screen and an encoder. The way I want to do it, is calling other M commands when the printer asks for input.
I hav…
-
I've a brandnew ESP3D, resolder the pins, so that I can connect the modul on the TFT (BTT) direct.
After call the I received the message, that the index.html.gz is missing, with a link to this side.…
Wesie updated
4 years ago
-
I am not sure the best way to do this. If this is wrong, please point me in the right direction. I know it isn't a traditional github "issue".
I feel that having lots of good quality BreakOut Board…
-
First nice work even I did not tested yet - which want to do ^_^
Mks use different Serial pins in wifi header depending of which module is connected
Which pins on header do you use for RX/TX ?
I …
-
I've tried to set the second cmd button in settings screen but It doesn't work.
Both the datasheet and the comment in mks_config.txt says "user-defined function1 and 2." but only button 1 does actual…
-
First flash went ok on the MKS3.2 v4.0 via sd card, retro, win8
The wifi chip wasn't installed at the time though, so I installed it, and on next power on the wifi firmware updated. Worked great, th…