-
Hi,
I have a scenario with multiple transmitters (arduino micro) and one single receiver (raspberry pi/python). All the transmitters send data got from their sensors to the receiver who consolidate…
-
I’m trying to launch the sample files by putting an ESP32 as TX and a RPi 4B as RX and I can’t get them to communicate with each other.
The sample files I am following are:
- https://raw.githubuse…
-
I needed multiple free pins with ATtiny85 so used the NRFLite 2 pins solution for Rx. The Tx needed to be run in conjunction with a RPI which is supported with nRF24 library (https://github.com/nRF24/…
-
**Have you looked for this feature in other issues and in the docs?**
Yes, I didn't find anything related to this feature request
**Is your feature request related to a problem? Please des…
-
Thanks for providing this information, circuit, videos and explanation at http://chaeplin.github.io/project-01-button.html.
It can detect the momentary switch while awake which is nice but as far …
-
### Describe the bug
First of all: big thanks to all the work for this project! Very happy to be using this already for quite some time :) .
My bulbs already had the issue that they would turn o…
-
Hi,
Having previously created a small network of NRF24L01 modules with Arduino Uno’s, I now have a need increase capacity in the master device. Consequently, I now have a custom breakout board …
-
root@Rasp-VPN:~/rf24libs/RF24Gateway/examples# make install all
g++ -std=c++0x -Wall -I../ -lrf24-bcm -lrf24network -lrf24mesh -lrf24gateway RF24GatewayNode.cpp -o RF24GatewayNode
/usr/bin/ld: //usr…
-
Hi,
Is it possible to use ESP32's HSPI instead of VSPI to communicate with nRF24L01? I would like to use pins 12, 13, 14 insead of 19, 23, 18.
-
I have connected my NRF24 module as described here http://tmrh20.github.io/RF24/RPi.html to my RPi
I cloned this repository and have Build using SPIDEV (I have ensured SPI was enabled and double ch…