-
Hi,
When I tried to run a simple flowchart (see screenshot below) with RTL-SDR dongle on Ubuntu 16.04 LTS, the program threw an error "what(): port number 0 exceeds max of (none)". The output is …
-
### Description of the setup:
* Device: RedPitaya
* SD card image: red-pitaya-alpine-3.6-armhf-20171130
* Application: VNA
* Other relevant information:
### Description of the problem…
-
Can anyone tell me what transmit power is produced by the RedPitaya running sdr_tranceiver_hpsdr and to what extent this is controlled by PowerSDR mRx PS running under Win10. Someone told me this is …
-
Hi Pavel,
I wanted to access DDR RAM regarding that i was referring your adc_test project. I am not able to understand what is happening in the project and how to see the output. I was using monito…
-
I booted ubuntu 16.04 LTS on my old PC to try CubicSDR 0.2.3.
With a fresh build of CubicSDR-0.2.3.tar.gz, CubicSDR did not see my Sdrplay 1 (RSP1), but my SdrPlay 2 (RSP2) seemed to work perfectl…
-
The following is question by @parveennisha copied from https://github.com/pavel-demin/red-pitaya-notes/issues/464#issuecomment-343465934.
> Hi Pavel
> I am trying to implement the frequency counte…
-
## Expected Behavior
I have installed GNURadio 3.7.11, GQRX and libraries for RTL-SDR, HackRF. GR and GQRX work perfectly. I have no idea what is wrong.
## Actual
> serdar@Mavrikant-Ubuntu:~…
-
I use the VNA application and a RF bridge to measure the VSWR of my Antenna and the GAIN of some of my filters. For the VSWR, I do the usual SOL calibration with the ""DUT port" of the RF bridge and …
-
### Description of the setup:
* Device: RedPitaya board
* SD card image:
* Application: Frequency counter
* Other relevant information:
### Description of the problem:
I am trying…
-
### Description of the setup:
* Device: Red Pitaya (RP)
* SD card image: red-pitaya-alpine-3.6-armhf-20171025.zip
* Application: vna-win32-20171012.zip
* Other relevant information: Wind…