-
Hi, this is not really an issue but a nuisance.
I am using script in s3d, so my prints start printing right after upload to octoprint. But this feature is not compatible with AW. Would it be possi…
-
Every time I try to print this happens.
It homes all axes, extrudes a bit of filament as I have it set and then error.
\--
7:33:47.966: !! MCU 'mcu' shutdown: Stepper too far in past
17:33:47.96…
-
I apologize in advance for this question, and i'm sure all the information is in the docs, but I am just overwhelmed with all the information and configuration options. I only used marlin for about 5…
-
A print failed early on with the error "Move exceeds maximum extrusion (8124319918345161.000mm^2 vs 0.640mm^2)". This happens somewhat frequently and can usually be fixed by shifting the model sligh…
-
With #1148 codegen server of S3 model from `aws/sdk/aws-models/s3.json` gives a bunch of errors like the below :
```
error[E0308]: `?` operator has incompatible types
--> src/operation_deser.…
-
Hi,
Is there an option to see which layer the printer is actually printing? We can see the Z height and calculate approximately but it would be easier if we could see the exact number. This could be …
-
Am I right, that pressure advance will have no effect when you print a tube or cylinder?
-
Hi all,
This is the first time I use the second hotend on the E3D Chimera since Marlin RC8. My first hotend has a 0.4mm nozzle and works reliably. The second hotend has a 0.6mm nozzle.
I have …
-
This is very rare...
After work some hours and all is very well, the Extruder 0 move around -100 aprox and the filament go out and continue working....
Of course continue working in the air, because t…
-
I recently switched from 1.0.2-2 to 1.1.0-RC8 and confirmed it on RCBugfix 1e4d4e5.
Repetierhost and Server report some temperaturespikes to 1000-7000°C on 1.1.0-X.
When I switch back to 1.0.2-2 the…