-
I believe this problem may have been introduced by the lower-power branch.
I don't have a simple how-to-reproduce, because the simple program I created to look for the problem seems to work just fi…
-
I am trying to browse through the code, I want to extend grbl to output the current X,Y,Z position for a DAQ, I tried finding the code but I am newbie with grbl and couldn't find it, if anyone has don…
-
I'm not sure if I'm doing this completely wrong or something but I cannot figure out how to make this screen draw more than ~5 frames per second. Just drawing one pixel takes about .75 seconds.
I'm…
-
Dear
I am using the NRF52832, using the following prj
```
##########
# for GPIO
##########
CONFIG_GPIO=y
##########
# for BLE
##########
CONFIG_BT=y
CONFIG_SENSOR=y
##########
# f…
-
**Describe the bug**
Windows 10 reports a transfer error after writing the last block. Similar to https://github.com/adafruit/Adafruit_nRF52_Bootloader/issues/46. The transfer is successful.
**S…
-
Hi Jomelo,
I've used your lib now for different projects and the most are running on SAMD21 boards like Adafruit's Feather M0. Yesterday I tried the new Feather M4 Express with the SAMD51 and it a…
-
I am trying to run another build on my project, which I built and uploaded before without any issues. Originally I did this in VS Code, but because it kept getting the errors, I tried Atom, but I'm g…
-
#### Description
The I2C baudrate is always derived from `CLOCK_CORECLOCK`, even if a different `.gclk_src` is selected. If `CLOCK_CORECLOCK` is too high, the resulting baudrate will is too big and a…
-
It seems something about #2297 broke the status neopixel, at least for Winterbloom Sol boards.
Firmware built from previous revisions works fine, and all firmwares built after the change are affect…
-
**Is your enhancement proposal related to a problem? Please describe.**
This is to keep tracking of drivers to DT_INST related to Atmel SoCs. The worked started with #22806.
**Describe the solut…