-
```
Use STM32F1xx , with ST virtual com port for USB (serial port) full speed
communication.
the software do not recognize the port.
```
Original issue reported on code.google.com by `michanis...@g…
-
```
Use STM32F1xx , with ST virtual com port for USB (serial port) full speed
communication.
the software do not recognize the port.
```
Original issue reported on code.google.com by `michanis...@g…
-
```
Use STM32F1xx , with ST virtual com port for USB (serial port) full speed
communication.
the software do not recognize the port.
```
Original issue reported on code.google.com by `michanis...@g…
-
```
Use STM32F1xx , with ST virtual com port for USB (serial port) full speed
communication.
the software do not recognize the port.
```
Original issue reported on code.google.com by `michanis...@g…
-
## Environment
- Module or chip used: ESP32
- IDF version: v4.2
- Build System: CMake|idf.py
- Compiler version: 2020r3 8.4.0
- Operating System: macOS
- Using an IDE?: No
- Power Supply: e…
-
Hi, I don't own a Waterrower with S4 computer, I only have a WaterRower A1 with a broken display, so I am trying to emulate the serial SIII protocol with a microcontroller directly reading out signals…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
# Some notes after discussions among devs on 2019-05-12.
### Here's some things I think we agreed on
- We wish to add some form of remote control interface to LIAM.
- Modularity is important. Thi…
-
In Serial communication sometimes one wants to flush all data in the receive buffer at once. E.g. because data has become invalid. - https://forum.arduino.cc/index.php?topic=530650 -
The code to d…
-
Please see the attached sketch which reproduces the issue. This is the output with and without a manual DNS address:
```
// With default/GW DNS address.
00:37:09.929 -> Attempting to connect to S…