-
Blank page on : https://keycloak.mydomain.com/auth/admin/master/console/
upgrading from
2.3.0 -> 2.4.4
keycloak is running on port 8080
```
extraEnv: |
- name: KEYCLOAK_ADMIN
…
-
Hello , I started to using yours library. I am impressed with how many things I have achieved on my Raspberry PI with this library. I created a device which comunicate with sensor throught SPI. But th…
-
`IndexLoadingConfig` should always be initialized by `TableConfig` and `Schema`, and all the index related config should be extracted from them. Right now we allow setters to internal fields such as `…
-
Seems to be a recurring issue with this driver. I'm sorry if this has been covered before. I'm an amateur when it comes to embedded and it's my first time doing it.
I have a Pi Pico with a Pimoroni…
-
The LTC2325-16 is Quad, 16-Bit, 5Msps/Ch Simultaneous Sampling ADC.
The LTC2325-16 has a high speed SPI-compatible serial interface that supports CMOS or LVDS. The fast 5Msps per channel throughput.
-
Dear all
I'm trying to set up a board using Microchip's MCP2518 controller ([MCP2518FD CLICK Board](https://www.mikroe.com/mcp2518fd-click)) together with an Arduino Uno, but I can't get SPI commun…
-
SPI is reading all 0's from the decoder attached to the Due. @DeepFriedDerp is there a chance the due clock cycle is too fast? I don't remember if we tried slowing it down or not.
The other thing …
-
Hi there,
Just wondering if it was possible to use two or three different SPI displays with this driver? Ideally they would all have different things being displayed. Thanks!
-
I am trying to use mfrc522 RFID reader with the A9g.
I have found this Micropython class [https://github.com/wendlers/micropython-mfrc522](url)
It only supports WiPy, LoPy ,FiPy and ESP8266.
I kn…
-
How can we be sure we are connected to a particular SPI rack? There is the `get_firmware` method, but I do not see any method that can generate a unique identifier (e.g. something like a MAC address)
…