-
### Is your feature request related to a problem? Please describe.
_No response_
### Are you looking for hardware support?
Does marlin support ESP-S2?
### Describe the feature you want
Hello ever…
-
everything seems to be running fine, but i've noticed that the 2nd motor socket (y-axis) seems run unusually warm. even when just powered on and not used it seems to 5-10 degrees warmer. intuitively…
-
I work on the firmware for Replicape, and we're having an issue on recent images/kernels that we seem to lose our GPIO pins for the steppers. Our code manipulates these pins from the PRUs, which we ac…
-
When I got to setup GRBL on my arduino Uno with the CNC shield that I got from your video (amazing tutorial btw, very easy to follow), Im able to flash mi-grbl to the arduino and change the configs no…
-
Hi !
This is not an issue, I'm the issue because i'm a really noob about code ...
But thank's for your cool and hard work about TMC chips.
My coding level can't go further than to use simple th…
-
Hi,
I noticed that both steppers get very hot when idle. Vref on the A4988s was > 0.9 V, which I'm sure isn't necessary for this scanner. I reduced it to 0.5 V which is plenty, motors stay cool.
…
-
### Description
hand held extruder- like a 3d pen, but less portable. i already have a mockup from a bolt/pc heatsink, and im working on modeling a handle to hold an e3dV6 or similar, but as marlin…
-
Well I cant be the only person with this problem.
Tried the 1.1 version first then the 2.0 version with exactly the same issue.
SETUP
SKR1.4 turbo
connected using the direct adaptor to the board
…
-
Hi, as I show in the video, when I try to change the direction of movement of the slider with the function ¨j¨ this does not change and continues in the same direction.
https://user-images.githubu…
-
## Description of Issue
I'm making a control box for car simulation, and there is a big step motor. As long as the step motor is not activated, everything works fine. Every time I start the step moto…