-
When issuing one of the directives `.big_endian` or `.little_endian`, the assembler fails with, for example,
```
Error: Unknown directive 'big_endian' at filename:lineno.
```
This is because the con…
abe-k updated
9 years ago
-
Many of the STM8 instructions have different forms for one-byte and two-byte addresses, and the one-byte form is preferable for space efficiency whenever possible. However, when an address argument de…
abe-k updated
9 years ago
-
If a `mov` instruction needs to use the long addressing mode, its length will change, but this mistakenly does not update label addresses. For example,
```
.stm8
.org 0x100
mov test, test
test: .ds8 …
abe-k updated
9 years ago
-
Hi,
I tried flash over STLink v2 on Mac OS X, but get libusb error:
./stm8flash -c stlinkv2 -p stm8s103 -w /Users/MartianZ/Documents/STM8_INITIAL/x.inx
Determine FLASH area
libusb:info [process_ne…
-
hi Valentin,
I would very much like to use your stm8flash tool under MacOS X 10.10.3. However, I ran into a problem for which I need your help. Here's my steps with observations:
- installed pkg-conf…
-
I'm working on re-implementing this on a TI Stellaris Launchpad with a spare "small" transmitter.
On the STM8, which pin is the A7105's Chip Select line?
-
The output pin means enabled at 0V, when the unit comes online its default for the output control pin is LOW 0V so the output is enabled until the MCU boots up sufficiently to turn the output off, ass…
-
我弄了个规则
```
{name: '微雪电子',
url: /^http:\/\/www\.waveshare\.net\/Article\/*.htm,
exampleUrl: 'http://www.waveshare.net/Article/STM8_Application_2.htm',
nextLink: '//div[@id="pageLink"]/foll…
-
I am trying to build a kernel image for z80pack. There seems to be some error from the sdcc compiler and I'm not sure what to do about it.
```
$ make
rm platform
ln -sf platform-z80pack platform
/Ap…
-
Hello!
I try build this example with latest version of tools:
http://master.dl.sourceforge.net/project/sdcc/snapshot_builds/sdcc-src/sdcc-src-20140202-8938.tar.bz2
http://citylan.dl.sourceforge.net/p…
iDoka updated
10 years ago