-
I cited some code in the forums ([What’s best way to determine Pimoroni product from MicroPython?](https://forums.pimoroni.com/t/whats-best-way-to-determine-pimoroni-product-from-micropython/21092)) w…
-
>>> temperature, humidity = sensor.measure()
Traceback (most recent call last):
File "", line 1, in
File "sht30.py", line 136, in measure
File "sht30.py", line 100, in send_cmd
TypeError: …
-
I've managed to get my ST7789V based display working almost correctly, however, I noticed the cursor was disappearing off of the right hand side of the screen. I used the command:
```
xdpyinfo | …
-
Some recent versions of the BTT TFT Touchscreens (https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware) make use of the GD32F205VC MCU so this project should consider adding support for thes…
-
**Firmware**
```python
Adafruit CircuitPython 6.2.0 on 2021-04-05; FeatherS2 with ESP32S2
```
**Code/REPL**
```python
import time
import board
import displayio
time.sleep(…
-
I'm not sure I can say this is an issue related to your software (which, by the way, is incredible: kudos!). However, I'm using an ST7735 cheap clone and I can't put the screen in landscape mode (out …
-
MEGA 2560 board with 3.5" TFT LCD Shield driver ili9481 no touch screen. User_setup.h uncommented for #define ILI9481. Sketch uploading successfully. Serial monitor on and displaying test data but scr…
-
Thank you for providing this excellent tool! However, it's also been a bit of a challenge, but in a humorous way :D Here's the breakdown of my current test setup:
Raspberry Pi Zero W with the vanil…
2kohm updated
6 months ago
-
my MKS tft is now running on a Ramps 1.4, if I have connected the tft the control via USB (Octoprint) does not work anymore ... is that the same USB port ..? can one adjust this in Marlin?
-
Hi.
I wired following the guide, and run the example but only got white screen.
When I remove the LED wire, it blacked!!!
Anybody, pls help me :(
![Only white](http://i.imgur.com/LVqIfrT.jpg)
huytd updated
9 years ago