-
The TB6612 chip listed on the schematic and in the comments is just a motor driver chip. There is a second chip on this board, providing the I²C communications and PWM generation -- however, it's unla…
-
I am attaching Polish language pl-PL for adding to source if you could.
pl-PL.h
--------------CODE start----------------
/*
pl-PL.h - localization for Polish without fonetick - Poland for S…
-
I uploaded your binaries to my Nodemcu v1.0 (It has ESP-12E). after successful uploading, I restarted my device by removing and inserting the cable back. The LED on ESP blinked very fast.
I read in…
-
### [l293d-h-bridge - circuits.io](https://circuits.io/circuits/3946749-l293d-h-bridge/edit) - janzeteachesit tvbc
[roving-rover-hbridge-circuits_io.md](https://github.com/janzeteachesit/Learning-D…
-
I suggest you to let the user configure the maximum number of stations using telnet and also the option to set the ESP to work at 160 MHz. Would also be great to see it working on Wemos D1 Mini with b…
-
I'm trying my new Wemos D1 with the latest esp8266 libraries on IDE 1.6.5. I compiled WiFiWebServer.ino from the examples. I get easily connected but unfortunately after a couple of seconds it keeps d…
-
Here I go again wishing I had a logging function. Maybe I need to plug in that micro SD card and see what it can do?
ESP-01 is a no-go. WeMos has a shield! And a [data logger example](https://github.…
-
### Expected behavior
Building a firmware with HTTP and only the bare minimum modules (file gpio net node tmr uart wifi) will run on a 512k flash ESP.
### Actual behavior
The firmware clocks in…
-
I am waiting for Sonoff switch. Can I flash my Wemos D1 mini to test it out in my home setup?
Thanks...
-
Hello,
Would it be possible to add a support for a 64x48 OLED display. I do not have much experience here. Can I add it manual?
Thanks