-
👋 Hi there,
is it possible to control multiple breezers only with single board? It seems not supported by configuration yaml?
I've had a 4 x Tion Lite with externals CO2/Temp sensors. I would lik…
-
I got some issue over this configuration
`PC -- Lan -- Router -- Lan -- PS4`
but I can run the remote play if it is in this configuration
`PC -- WIFI -- Router -- LAN -- PS4`
or
`PC -…
-
### Checklist before submitting an issue
- [X] I have searched through the existing [closed and open issues](https://github.com/elkowar/eww/issues?q=is%3Aissue) for eww and made sure this is not a …
-
### Describe the bug
With wpad-basic-mbedtls, an unencrypted mesh can be created between OpenWRT devices, and it is backwards compatible to at least release 19.07.4. However, in the current snapshot …
-
Thanks for your project!
My inverter powered up this morning and thanks to your project I was able to connect + setup wifi without (so far) having to go through TSUN/Orbit app registration stuff.
…
-
*stephane:*
**Environment :**
- Netgear R7800 (Nighthawk X4S AC2600)
- OpenWrt 21.02.0-rc1 (sysupgraded from OpenWrt 19.07.7 with some basic configuration)
**Problem encountered :**
After doi…
-
After flashing the ESP8266-01S it finaly appear on my WIFI network. I connect whith my smartphone and entering the default password "configesp" then I open the 192.168.4.1 web page in my smartphone br…
-
The tuya wifi temperature and humidity sensor is not working in tuya local.
I added it into the configuration file.
Is there a possibility to get it in home assistant?
This tuya wifi sensor:
…
-
Interesting problem. I have two raspberry pi 4b, one with 8gb, one with 4gb. I am able to log onto the wifi hotspot remotely, then when I plug my camera into the usb3 on the 8gb model I lose the wif…
-
Look into a good FPGA to use for this project. It should have a small size, but a good clock rate.