-
Hi,
I'm very new to Arduino and only found it when wanting to get some GIF pixel art on my wall. I've purchased a Teensy 4.1, SmartLED shield V5 and a 64x64 RGB LED board. I've been able to get the…
-
### The problem
![20230622_123729](https://github.com/esphome/issues/assets/77878228/68ef07fb-3c4a-4e67-bf87-16003ef0cd42)
![20230622_123720](https://github.com/esphome/issues/assets/77878228/b3…
-
请提供下述完整信息以便快速定位问题/Please provide the following information to quickly locate the problem
- 系统环境/System Environment:centos7 /tensorrt 8.2 cuda11.0 cudnn8.1
- 版本号/Version:Paddle:2.6 PaddleOC: 问题相关…
-
### PROBLEM DESCRIPTION
If the display is currently on and power1 is toggled, the display is turned off. PWM1 exists which power1 should toggle.
Turning on SetOption73 and using rules to to…
-
**Describe the bug**
The script `run_streaming_small_model.sh` failed at stage 2
**To Reproduce**
Follow https://github.com/wenet-e2e/wenet/tree/main/runtime/gpu/tensorrt
```bash
docker pul…
-
Hi,
I'm noticing an issue in this library (but I don't know where) when I have both the ATECC508A and SparkFun Qwiic OLED Display (128x32) hooked up on the same I2C bus. I have these connected in s…
-
Hello,
I have bought a ESP8266 with an embeded 0.91" Oled screen (128x32), after installing ESPEasy in MEGA version (to have OLED 128x32 choice available) a bug is present, the screen work for few…
-
Hi,
This is a very strange bug.
Most of the time (9 times out of 10) everything works perfectly, but sometimes the display does not start, while the ESP32-S3 continu to work normally.
Contex…
-
I'm using U8G2 on an AVR128DB48 with an 128x32 OLED; works excellent! But one question is open for me: I'm using a timer interrupt for audio playback which works fine and without interfering any UI fu…
-