-
Build:⋄
20113 - Mega
System Libraries:⋄
ESP82xx Core bc816c65, NONOS SDK 2.2.2-dev(a58da79), LWIP: 2.1.2 PUYA support
Git Build:⋄
mega-20210503
Plugin Count:⋄
77 [Normal] [Testing] [TEST_A]
B…
-
### PROBLEM DESCRIPTION
I'm using two BME280 devices with different addresss 0x76 and 0x77.
The data from the sensors are displayed correctly on the webui.
BME280-76 Temperature 22.2°C
BME280-76 H…
-
### The problem
I open this new issue because the previous #4172 was closed without explanation
Five esp32devkitv1 boards with Project esphome.bluetooth-proxy version 1.0 and espidf framework. Of th…
-
### PROBLEM DESCRIPTION
I use a BME680 with Sonoff S55 and Tasmota outside since end of 2022. Yesterday, it started to show these and these only, no change:
```
BME680 Temperature: 34.6 °C
BME…
-
I am using the dual IMU code for MPU9250 with an ESP32 board. I have commented out the RTC related code and change IMU idetification ids to 0x73.
The second IMU is not detected when I run the code.
…
-
I'm using this code to read from my HX711/load sensor:
```
use esp_idf_svc::hal::{delay, gpio::PinDriver, peripherals::Peripherals};
use loadcell::{hx711::HX711, LoadCell};
fn main() {
es…
-
1) Some RISC-V architectures have as many as 80 GPIOs. Defining those in KConfigs will be annoying, especially given the current awesome trend of pins being behind a MUX so they can be configured as …
-
### Category
Hardware Compatibility, Other
### Hardware
T-Echo
### Firmware Version
2.0.6.97fd5cf.uf2
### Description
Hi all
I got two brand new Lilygo TTGO Meshtastic T-Echo 8…
-
Hello below the errors.
What board should I use to compile it?
Tried TTGO Lora32-OLED v1 and also ESP32-WROOM with ESP32 1.01rc1, 1.01 and 1.01rc2 and 102rc2....
in file included from /Users/yogh…
-
### What happened
I have configured a MQTT server and associated sensors in my moonraker configuration. However, the sensors do not receive data.
Symptoms:
- MQTT data is not displayed in the fro…