-
Moved from #1066.
I am using a [Moteino M0](https://lowpowerlab.com/guide/moteino/moteinom0/). A Moteino M0 uses a [ATSAMD21G18](https://www.microchip.com/wwwproducts/en/ATsamd21g18) processor. Whe…
-
Pardon the narrative....
Ever since the earliest versions of SavvyCan / GVRET I had a problem with a non working EEPROM. I was very aware this had to do with my own hardware setup (just a Due with …
-
add support for bnxt_en. I added test support and validated against that, the output is from a 6.6 kernel with in-kernel driver.
I've already made the PR for you in #32
-
Hello I have bought the relatively universal programmer and did the rev 2 mod on mine, I am running the latest FW at the moment and am I having problems flashing / reading from the board
I have a f…
-
**FPP Version and Hardware**:
FPP 8.0 running on BBB
**Describe the bug and Steps to reproduce**:
1. Flash FPP BBB 8.0 zip to sd card.
2. boot
3. does not boot, or pull ip.
4. Does not fix…
-
not quite sure if its a real problem, but using ~ is a convenient short hand at least.
doesn't work
```
pi@raspberrypi:~ $ sudo ~/hats/eepromutils/eepflash.sh -w -t=24c32 -d=0 -a=50 \
> -…
-
**Is your feature request related to a problem? Please describe.**
I am setting up a system to reset CM4 devices to factory settings - however I need to reset the partitions and then replace the eepr…
-
Instead an offset is saved that only is set when a manual SOC reset is executed. The used Wh is always 0 at startup.
A fix would be the replace the lines in firmware/common/src/eeprom.c
```
m_eep…
-
```
I'm get 622ANHMW (Intel® Centrino® Advanced-N 6200) wifi card for branded
notebook (i'm think it's Lenovo) and put it in Acer 3830TG.
KALI Linux and Ubuntu working fine. Windows 7 x64 gets "Devic…
-
#### Description
The inefficiency is in SfpBase, xcvr_mem_maps etc and this also affects xcvrd, since both xcvrd and sfputil use the same api's of SfpBase such as `get_transceiver_info & g…