-
Over the past few years, I've learned that new users have a hard time finding device libraries so they sometimes re-implement support for a device (or give up). Good libraries also go unused due to na…
-
I don't think this is a case of bad corsair naming (at least I hope not) driver in lsusb is usbhid.
```
$ sudo liquidctl list --debug
[DEBUG] (cli) (main): version: liquidctl v1.8.1
[DEBUG] (cli…
-
In my example, in a loop reading the device as fast as possible, and doing other unrelated things..
```
while 1:
acceleration = cpx.acceleration
.....
```
You can get an error:
…
-
Is it possible to use the i2cdriver like a native I2C port, enumerated in /dev/i2c-*?
On my Raspberry Pi, I use the Python smbus2 library to control I2C devices. I would love to be able to plug the…
-
#### Description
At the moment, the I2C peripheral driver interface is defined to work only as a master. To use RIOT on a slave device, the I2C interface would have to be extended. It should allow …
-
Hi,
I am trying to use Picam on an Rpi 5 with v3 camera module. The libcamera-hello works fine, but I get the following error when trying to run picam:
:~/picam $ sudo ./picam --alsadev hw:0,0
…
-
Hello,
Firstly, thank you for taking the time to document your procedure. It has helped me tremendously in getting started with my project.
I have connected my MAX30205 sensor (as shown in pict…
ghost updated
4 weeks ago
-
**请求帮助:**
同一个I2C线,分别用ch341+i2c-tool和其他方式抓出来的数据。芯片是CH341T
![P30926-100251.jpg](https://github.com/WCHSoftGroup/ch34x_mphsi_master_linux/assets/48668011/9a88f856-bf3e-48fb-80c6-cdd4601b9be7)
**…
-
I found the following on my nexus 9:
flounder:/ # cat /sys/devices/platform/tegra12-i2c.0/i2c-0/0-006b/charging_state
enabled
Can you add support for the Nexus 9? It would be much appreciated!
-
When I try to run example gesture code I get:
```
Gesture Test
============
Traceback (most recent call last):
File "", line 31, in
File "apds9960/device.py", line 185, in readGesture
…