-
I see packetloss somewhere about 2-8x as high in monitor mode compared to other cards. Could somebody give me a hint on how/where to debug this further?
- rtl8812au driver from the v5.1.5 branch
-…
-
### Description
gre p2p interface,ip is 10.1.1.2 and 10.1.13,it is base on eth4(wan interface)
start frr ospf proto,care route's br-lan and gre_0 interface
R1:
br-lan 192.168.11.0/24
gre_…
-
In a2server/scripts/tools/a2server-aliases the command "showip" is defined as printing the IP address of eth0. However, if you define a different NIC for AppleTalk in atalkd.conf manually, you would w…
mabam updated
7 years ago
-
```
What steps will reproduce the problem?
1. Connect server and client in a 1GBit Switch
2. Start both servers (fakewww and web100)
3. Set the following tcp paramters in client.
echo 1 > /pr…
-
```
What steps will reproduce the problem?
1. Connect server and client in a 1GBit Switch
2. Start both servers (fakewww and web100)
3. Set the following tcp paramters in client.
echo 1 > /pr…
-
```
What steps will reproduce the problem?
1.using .ovpn config works on my pc
2.
3.
What is the expected output? What do you see instead?
192.168.74.XX (range 10-15), cant ping or connect to VPN net…
-
```
What steps will reproduce the problem?
1.using .ovpn config works on my pc
2.
3.
What is the expected output? What do you see instead?
192.168.74.XX (range 10-15), cant ping or connect to VPN net…
-
```
What steps will reproduce the problem?
1.using .ovpn config works on my pc
2.
3.
What is the expected output? What do you see instead?
192.168.74.XX (range 10-15), cant ping or connect to VPN net…
-
```
What steps will reproduce the problem?
1.using .ovpn config works on my pc
2.
3.
What is the expected output? What do you see instead?
192.168.74.XX (range 10-15), cant ping or connect to VPN net…
-
```
What steps will reproduce the problem?
1. Connect server and client in a 1GBit Switch
2. Start both servers (fakewww and web100)
3. Set the following tcp paramters in client.
echo 1 > /pr…