-
Quick question, I guess should be fairly easy to adapt it to be used with RTL-SDR and LimeSDR.
Could you point at which files I should look into, to make it compatible?
Thanks in advance for the hin…
-
Good example here:
https://github.com/myriadrf/snapcraft-sandbox/blob/master/limesdr-server/snapcraft.yaml
More info:
https://wiki.myriadrf.org/Snap_Packaging
-
I've started getting this in multiple Ubuntu 18.04 systems upgraded from 4.8 that previously worked. A problem with the Limesdr plugin? I'm only using the .deb version currently.
Terminal output:
…
-
Hello,
We have two LimeSDRs and we execute the srsLTE perfectly with a mobile phone.
But, we have problems connecting the UE by doing "srsue". It seems that UE sometimes doesn't create the subnet…
-
Hello,
I have installed soapysdr in my linux environment (18.04) and my plutosdr is detected by the soapysdr-util tool. I know the plutosdr is not hpsdr compliant but I also saw that you seems to b…
-
This is a support request for LimeSDR support for gpio through the fpga for transmit and possible band pass selection on J19 ( i think )
-
First off, this project is amazing. I think I might be in love with every single bit of it.
I was looking into what the changes to increase time resolution would be, I never implemented a FFT in ha…
-
The receiver behaves badly in presence of two signal components (two peaks in CIR) when the first peak is weaker than the second. The receiver locks onto the stronger one, but should lock on the earli…
-
Hi, I used SoapySDR that LimeSDR simulate USRP.
uhd_find_devices and uhd_usrp_probe can find LimeSDR.
If I want to use LimeSDR simulate USRP in gnuradio, what should i do to change in the UHD so…
-
This occurs for Rx/Tx devices like LimeSDR, HackRF... with a Rx and Tx device set opened for the same device. Scenario is to start Tx stop it and leave Rx alone all the time. Then shutting down the ap…
f4exb updated
5 years ago