-
Hello
I'm using this library to transmit NMEA GPS Sequences to sort of build a tracker. Of course not all sequences as the link would be too slow, but the $GPRMC and $GPGGA sequences which are most…
-
Hi, please help me out.
So i have two arduino nano, connected LoRa sx1278 units.
I use the to send:
LoRa.beginPacket();
LoRa.write((uint8_t*)&data, sizeof(data));
LoRa.endPacket();
and t…
-
Hi Am trying to use the LoRa.setSyncWord(syncWord) function
I have set my T-Beam as a sender and a Heltec Board as the receiver and am successfully sending data without issue.
However as I under…
-
Node: FiPy with V1.16.0.b1
Gateway: LoPy with V1.16.b1
Software: scripts from the exmples lib: pycom-libraries/examples/lorawan-nano-gateway/
Both the gateway and the node are proeperly registered …
-
### Hardware:
Board: ESP32 DevKit v1 & ttgo_lora
Core Installation/update date: latest
IDE name: Arduino IDE
Flash Frequency: 40Mhz
PSRAM enabled: …
-
sender:
```
sx128x-util --log-level debug gfsk tx --data "abcd"
22:43:30 [DEBUG] sx128x_util: Connecting to SPI device
22:43:30 [DEBUG] sx128x_util: Configuring I/O pins
22:43:30 [DEBUG] sx128x_u…
-
Hi,
My question is how far the transmission distance between two MKRWAN boards (only point to point). I tested them about 250 to 300m, is that right ? The receiver got RSSI about -52 to -62 with a si…
-
First thanks a lot for your great lib. I had a lot of fun with it in the past and learned also from your coding concepts. I'm also a bit shy to bother you with this, but I'm also curious.
The backt…
-
I wanted to bring to your attention following links on this subject:
https://www.youtube.com/watch?v=6NsBN42B80Q
https://github.com/SensorsIot/ESP-Now-Tests/blob/master/EspNow_Slave_ESP8266/EspN…
-
Dear Linar,
slightly adapted template for Raspberry issue
## Hardware
- [ ] Prime Mark II
- [ ] Standalone
- [ ] UAV
- [ ] UAT module
- [ ] SkyView
- [ ] Flight Recorder
- […