-
Complex-power injections can come from loads and/or distributed generators. Measurements are device-specific and need to be combined, e.g., when single meter includes both a house and a rooftop solar …
-
Did you use a measurement device to independently verify that the lights were 40 hrtz? If so, I would like to know the device. I read that it's harmful to gamma waves if the pulse isn't exactly 40 hrt…
-
### Link
https://www.zigbee2mqtt.io/devices/BSD-2.html
### Database entry
{"id":9,"type":"EndDevice","ieeeAddr":"0x9035eafffe123b2f","nwkAddr":10333,"manufId":4617,"manufName":"Bosch","powerSource"…
-
Just a suggestion, when its already on the network mdns discovery should be implemented and home asstiant integration made for it.
-
I have a Pi Zero W reading registers from an AdaFruit MAX17042 battery fuel gauge [https://www.adafruit.com/product/5580](url) using the I2C bus with a single cell LiPo battery and a 68 Ohm resistor …
-
**Describe the problem you have/What new integration you would like**
Please add the integration of a new three-phase energy meter with external current transformers and a MODBUS interface
**P…
-
## Version of the custom_component
v0.0.20
## Configuration
```yaml
Add your logs here.
state_class: total_increasing
integration: sunspec
sunspec_key: TotWhExp
label: Total Watt…
-
-
Hello,
i have installed the script on a fresh Raspbian installation. It seems that the count option has no effect at all. With -c 1 the script should stop after the first run bit it goes ahead.
su…
-
Hello i had this code for sensor
```
sensor:
- platform: wmbus
meter_id: 0x24356721 # 0x173A771
type: multical21
key: "0AF58C20AA94E0DC79B300DE3B00B61B"
mode: C1
total_wat…