-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
I tried following the instructions to patch myself, but Ghidra kept crashing on both my linux and win machines... please let me know if you need anything else. Just RTSP is needed, as I dont think Onv…
-
```
Testing with a couple of Logotech webcams; the code at present fails,
primarily due to not be able to set 'NTSC' (or other) standard.
With attached patch Camera now reports
--
simon@bourne:~/pyv4…
-
**Describe the bug**
It seems that trying to read an existing yarpserver configuration saved with `yarpserver --write` via `yarpserver --read` does not work on Windows, and instead the same error gi…