-
I normally do test plans and tests using Azure DevOps. I moved the code to GitHub as a courtesy to the Linux people but now we have to figure out how to manage testing.
Right at the moment I am sup…
-
Hello,
i have a NRF52832 Module without 32.768kHz X'tal and without DCDC.
But the Redbear examples doesn't work at all.
The Nordic Support said there are config headers which have to be changed t…
-
### Category
Hardware Compatibility, Other
### Hardware
T-Echo
### Firmware Version
2.5.6, 2.5.7
### Description
When T-Echo is off or with discharged battery. When connected exte…
-
### Category
Other
### Hardware
Other
### Firmware Version
2.5.0.d6dac17
### Description
A long press and "Shutting down" on the Heltec T110 put it into an approx 18 uA drawing sleep.
A press …
-
### Platform
NRF52
### Description
For my home station I would like to not need to rely on wifi (which for me drops off some times, and I have other constraints with it (namely a "not so good…
-
I've successfully compiled canokey-nrf52 firmware for my **Ebyte E104-BT5040U** and have **canokey.hex** and **canokey_flash.uf2** at hand . According to README, I should compile and flash **Adafruit_…
-
See https://github.com/microbit-foundation/DAPLink-microbit/issues/119
It would appear that DAPLink versions that are identical apart from their version number yield different behaviour when datalo…
-
I propose breaking out a number of large tests from the unittests to their own test. This to decrease the flash size of the full unittest binary a bit.
## Tests:
Flash sizes as mentioned below a…
-
The CMake configure-time is approximately 6 times slower on Windows than on Linux.
It should first be understood why Zephyr builds slower on Windows, and then depending on what is discovered we sho…
-
### Category
Hardware Compatibility
### Hardware
Heltec Mesh Node T114
### Firmware Version
2.5.0.9ac0e26
### Description
The app shows Heltec T114 nodes as "nrf52840dk" (such as in the node li…