-
currently GSpd is transmitted in "km/h". Is it possible to transmit the speed also in "knots"?
OpenTx and EdgeTx always assume that the speed is delivered in knots. If I then set the sensor unit to …
-
Hi! I'm using opentx on a flysky i6x, which doesn't have SD card support, so there are no CSV files available. But we have telemetry mirror being output on the smartport, which in turn goes to the Cra…
-
In page https://github.com/openvinotoolkit/training_extensions/tree/develop/otx/cli
links with details (`here`) as well as link to Face detection notebook are broken
.
## Steps to Reproduce
Use taranis x-lite and latest edgeTX version (2.7.1). The module had already been successf…
-
I have a Neuron 80 ESC (https://alofthobbies.com/frsky-neuron-series-escs.html) and my X20S is on 1.0.11 rc3. In OTX the speed controller rpm sensor allows you to adjust the number of poles on the mo…
-
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7ffff2afe700 (LWP 13776)]
Tile::__queryMaxCount (this=0x495ebf80, count=600,
maxQueryCount=@0x670000: 25921285) at …
-
MaskRCNN exported openvino model gets 0 score in evaluation.
Environment installed properly with docker by the relevant instructions.
Version 1.0.0 and 1.0.1 same behaviour.
Training works fine and…
-
otx 2 8.60
-
### Is there an existing issue for this feature request?
- [X] I have searched the existing issues
### Is your feature request related to a problem?
Whenever something changed in my telemetry the R…
-
I have followed all steps to install and run ote commands using this [link](https://github.com/openvinotoolkit/training_extensions/blob/develop/QUICK_START_GUIDE.md)
First error while running th…