-
I've got the FitPC2i up and running, I've installed the graphics drivers and everything. It runs pretty sweet for what it is to be fair.
It boots to the log in screen in seconds too!
I couldn't get …
-
I'm thinking of connecting a laser to my xPro, but not sure how to wire it and how to control it from G-Code. The laser that i'm looking at is https://www.aliexpress.com/item/10W-laser-head/3269642210…
-
```
What steps will reproduce the problem?
1. Connect a 3D camera that uses side-by-side technology.
2. Configure min. Battery Voltage (V) in the Config Tool.
3. Use FPV glasses that support 3D (SBS) …
-
```
What steps will reproduce the problem?
1. Connect a 3D camera that uses side-by-side technology.
2. Configure min. Battery Voltage (V) in the Config Tool.
3. Use FPV glasses that support 3D (SBS) …
-
```
What steps will reproduce the problem?
1. Connect a 3D camera that uses side-by-side technology.
2. Configure min. Battery Voltage (V) in the Config Tool.
3. Use FPV glasses that support 3D (SBS) …
-
# System information
+ Distribution name: Pop!_OS
+ Distribution version: 20.04 LTS
+ Python3 version: 3.8.10
+ akbl version: 2019.05.26
+ Computer model: Custom built
+ Daemon status: False
…
-
There is a very small mention that you can get 5V from T2 here: https://github.com/tessel/t2-docs/blob/master/Hardware/Tessel_2_Overview.md but it could stand to be more helpful, as here: https://foru…
-
```
Steps to reproduce the problem
1. Connect MinimOSD to the APM in parallel to the Xbee or any other modem,
following the instructions of the tutorial. Remember to do not connect the APM
RX pin w…
-
```
Steps to reproduce the problem
1. Connect MinimOSD to the APM in parallel to the Xbee or any other modem,
following the instructions of the tutorial. Remember to do not connect the APM
RX pin w…
-
```
Steps to reproduce the problem
1. Connect MinimOSD to the APM in parallel to the Xbee or any other modem,
following the instructions of the tutorial. Remember to do not connect the APM
RX pin w…