-
In the documentation to upgrade the firmware, there's a step called:
os.mkfs(sd)
this formats the sd card and therefore not true.
After not executing this command, it worked!
darox updated
6 years ago
-
We have a few W01 modules. We are trying to implement them in a new design but we are unable to update the firmware. I have grounded p2 (pin5) then momentarily grounded the reset pin but the W01 will …
-
https://docs.pycom.io/chapter/firmwareapi/pycom/network/bluetooth/
bluetooth.connect(mac_addr)
Opens a BLE connection with the device specified by the mac_addr argument. This function blocks until…
-
I have tried to install the pymakr plugin in ATOM and i can't get it to install.
This is the error i get -
Installing “pymakr@1.4.3” failed.Hide output…
> serialport@6.2.2 install /tmp/apm-ins…
-
Hi there, i am still unable to install the Pymakr 1.2.10 in the Atom version of 1.25.0. It show me failed to search for the package where stated there " connect ETIMEOUT "50.16.223.157.443". How can …
-
Hi,
I was trying this library on an Arduino MKR WAN 1300 to communicate with a Pycom board.
It wouldn't work until I explicitly called `LoRa.setSyncWord(0x34);`
The default sync word seems to be 0x…
-
I use both pyboard and xxPy, running both micropython. I used some code _cross-boards_ as far as possible, and I ran into a minor _annoyance_ for a function in `utime` called `ticks_diff()` that reall…
-
Building LoPy(Latest firmware update today) from Pycom. Getting this error on linux 64 bit OS. Please resolve this. Even i have tried the method above but no luck.
Error shown below-----
skmis@s…
-
Discovered on PyCon AU sprint day.
Using default values, a set of Neopixels don't seem to operate correctly and, instead, flicker at maximum brightness.
A work-around, changing an undocumented p…
-
Hello,
Using 'Pysense' board and getting the below error when I run the **_accelerometer_wake_** example.
```
Traceback (most recent call last):
File "main.py", line 18, in
File "/flash/li…