-
After the app has been running for a while, editing a distance or adding a walk causes the request to time out. Removing the lines related to redis appears to fix this issue.
Logs from timed-out re…
-
Hi,
I am new to C++. I have tried this API. It works good and code is maintained very well. I have tried both HTTP and UDP, it works fine. But I am getting error with UDS. I am not sure, can you p…
-
### Description of Issue/Question
One of my customers reported Jsnapy issue being the test reported 2x failures but there are no faults actually captured in the results.
Example output:
*****…
-
RPi **can't** communicate directly with Spectrum, mostly because it doesn't have enough GPIOs.
So, we must use something in between (a proxy chip) which has [enough GPIOs](2) to communicate with the …
-
Thanks for your efforts. I'm using an Espressif ESP32-S3-DevKitC-1 board with a Waveshare SN65HVD230. I have wired everything as mentioned, however, this is all I see in SavvyCAN.
![image](https:…
-
Hello FIND Team
I know that the client and the FIND server using the MQTT protocol to transfer messages. Now there are several questions, FIND server is how to use MQTT server? How the client re…
-
Hello,
I am testing mirroring with ProxySQL v2.0.6. I installed using the CentOS 7 rpm available from github.
https://github.com/sysown/proxysql/releases/download/v2.0.6/proxysql-2.0.6-1-centos7…
-
Have you considered replacing CC2530 in DIYRuZ Flower sensor design with a new TI CC26xx MCU like the CC2652 series or similar?
Should in theory make the battery last much longer and get better sig…
Hedda updated
2 years ago
-
A real kamstrup meter has some kind of delay between responses that varies somewhere between 20ms-150ms. This needs to be measured on the real meter and implemented as artificial delays.
Also, it see…
-
The OTLP exporter specification lacks clarity with regards to its retry strategy. I have reviewed a number of implementations across languages as well as the collector. From what I have seen, implemen…