-
**Kind of issue?**
_Assembly / HELP!_
**Which Board?**
_RGB_
**Which Board Revision?**
2.1
**What steps have you taken**
* [x] I have searched the Issues page
* [x] I have read the docum…
-
I have built the A4000 with this motherboard and have noticed a serious issue. The picture on the monitor was too dark when I used the RGB signals (indeed I was lucky to see anything). It turned out t…
ishe updated
6 months ago
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Problem description
The V1.41 DXF importer library breaks when trying to import or open a DXF file when …
-
**Describe the bug**
Using an FTDI board (ESP-Prog) I cant flash an ESP32-S2
**To Reproduce**
Steps to reproduce the behavior:
1. `cargo generate esp-rs/esp-template --name probe-s2 -d mcu=esp32…
-
A list of everything that should be decided and/or done for revC3 of the Glasgow hardware.
- [x] Finish qualification tests for revC2 ( #220 #221 )
- [x] Fix I2C address clash between SMBus Alert …
-
Per this link: https://community.element14.com/products/pcbprototyping/f/forum/53319/symbols-and-footprint-support-for-arduino-in-kicad-7-x
The user has experienced spurious warnings from the DRC c…
-
##### SUMMARY
The default size for the Names (top & bottom) is 1 mm which is way too big for SMD devices below 1206 (Imperial). I did not find a configuration where to set it (at board or main …
-
# Project Suggestion
**Describe your suggestion or idea**
Currently the module needs to be plugged in via the USB on the Pico, but this means sometimes cramming the cable in between your rails, …
-
I don't see the connect to the OBST pins in the PCG view that are in the schematic.
Am I missing something?
thanks
-
08 on the silkscreen is repeated twice. One should be 09