-
**Describe the bug**
When WiFi connection is established on boot (also with 100ms boot delay sometimes the connection to the WiFi happens after printer is connected to TFT), the echo output on the s…
-
All the fonts on the display are mirrored backwards I'm using a 240 by 320 display, how do I fix that?
-
Hello, from when we switched to the new eglib the two invertDisplay and setRedBlueTwist are not anymore working and they are just empty stubs..
As i am playing around with the project i had some prob…
-
Hello, I am using BMPTest function in esp_idf library st7789 but this function only supports displaying BMP image with 24 bit depth.
Here is the command line:
if((result->dib.depth == 24) && (resul…
-
hi, i'm a newer for esp32 .i want build a software about wearther,and show the wearther data to screen display,it run on st7789.
i got the firmware about T-DISPLAY-ESP32 from your project. it is a gr…
mhluo updated
2 years ago
-
I am trying to get the display on a T-PicoC3 [(link).](https://github.com/Xinyuan-LilyGO/T-PicoC3) From the factory the PicoC3 is programmed with Arduino and the display is working. But when I want to…
-
I am using a Waveshare 1.3 LCD, the one with 3 buttons and joystick.
This will need some small tweaking but this display can be bought cheaply through Aliexpress or Amazon,
https://www.waveshare.c…
-
I have been able to get 128x128 pixel ST7735 displays working with the Pico Pi. Great!
I recently tried a 240x240 pixel ST7789 display with the Pico Pi and have not gotten anything except a blank s…
-
Hi Bodmer.
A few months ago, I´ve managed to run Animated Eyes example using the Seeed Xiao Rp2040 and two GC9A01 round displays.
https://www.pcbway.com/project/shareproject/Finally_Animated_Eyes_u…
-
There are a few boards that support deep sleep and have a display, but the display becomes unusable after **fake** deep sleep, because the display is not released prior to being re-inited on wake. The…