-
There is an excellent LoRa map link that shows both trackers and igates and nothing else. However, it doesnt show my tracker. This is because the filter requires a TOCALL of APL* and it seems my tra…
-
Could you please also include a PDF file that gives the measurements and spacing for the solder pads? My software doesn't seem to recognize any of the existing file formats so I will need to create m…
-
Adafruit ST7789 Wide Angle 240x240
ESP32 DeviKit v4
I'm try to learn how to use the module Display but If I digit this code:
import display
tft = display.TFT()
tft.init(tft.ST7789, miso=19, mos…
LDS79 updated
3 years ago
-
Splitting this off into a separate issue as it doesn't appear to match what @rombrock reported in theirs:
I wasn't able to get FW 20240508/20240509 to work on my ZigStar LAN PoE gateway because the…
-
I have successfully configured a dual-interface connection on ESP32 (TTGO T-Call):
```sh
nsh> pppd &
[...] CONNECT
nsh> ifconfig
wlan0 Link encap:Ethernet HWaddr 98:cd:ac:7a:81:e0 at UP
…
-
**Describe Your Goal**
Running the standard ESP32 CameraWebServer example on an https webserver.
**What Does Your Project Look Like**
The same as the [official example](https://github.com/espress…
jov58 updated
2 years ago
-
Hi,
I'm testing this with a LoRa32 TTGO board, using DIO0 as the RX callback. The firmware also uses the SPI sdcard driver.
```
0;32mI (741) gpio: GPIO[26]| InputEn: 1| OutputEn: 0| OpenDrain: …
ghost updated
2 years ago
-
Hello.
I'm bulding a simple Pedalino with 4 buttons.
The pedal 4 is linked to the PIN 12 on TTGO T-display.
But when I connect this PIN 12 to my footswitch, the boot is impossible.
If I sw…
-
I'm not sure where exactly to report this, as it can more than likely be a hardware issue. But making a note here for reference.
While cleaning up TTN Mapper data I stumbled on a pattern where Cube…
-
I Got some errors trying to load .z80 files
1 - If you dont have the .scr file in / directory, I got an exception after press F3 key
2 - With .scr files in / (with .z80 files also) I got another…