-
I run the standard code, included in the [example folder](https://github.com/adafruit/DHT-sensor-library/tree/master/examples/DHT_Unified_Sensor). I put the sensor outside, to measure the current free…
-
I found something strange. I tried to add hx711 to my wemos mini board and I discovered that adding simple line:
`#include `
results that sending udp (ntp) packet procedure don't work - I have n…
-
I've created the ESP_SSD1306 library which is a copy of the Adafruit_SSD1306 library with some modifications in order to work with the ESP8266 board.
See my modifications at https://github.com/somhi/…
somhi updated
7 years ago
-
Text is not displayed when using the wemos oled shield. here is the code I use:
```
oled.begin();
oled.clear(ALL);
oled.clear(PAGE);
oled.display();
oled.setCursor(0,0);
oled.setFontT…
-
Dear developper,
I try to use the SdFat with a ESP8266 Wimos D1 and the SD Card at the same format.
The connexion pins used for this card is the following:
D5 = GPIO14 = SCK // SD reader
D…
-
Hi,
As the title says, I am unable to get any text to print on the display when I am using the ESP8266 thing.
As I was short on time, I used the adafruit_gfx library just for printing text and it wo…
-
Hello,
where can I get sd card interfacing with esp8266 example in lua language?
-
Currently when the heatpump starts up (e.g. after a power outage/disconnection from power supply) the ESP8266 has to wait for some time before connect() will work. We should add some code to detect if…
kayno updated
7 years ago
-
I'm trying to get the ESP8266 to talk over I²C to an Arduino board working as a slave using the standard Wire.h library there. The code I'm using to test this on the micropython side is:
```
from mac…
-
Hi,
I did a misconfiguration in mqtt credentials, now my d1-mini is trying endless to connect to wrong server. I have a reset button on d1-mini, but after pressing it for 5 seconds, it always reboots …