-
### Description
Event ID not exist issue occur when running websocket
### Test Code
[WebSocketServer.js](https://github.com/01org/zephyr.js/blob/master/samples/websockets/WebSocketServer.js);
…
-
Hi,
Q1. Is it possible to run 6lbr on Raspberry Pi (in router mode) in GUI mode?
I connected a screen to RPi and was trying to run GUI on the same RPi, (that has 6lbr router running correctly in headl…
-
**_Reported by Gajinder Vij:_**
The Interface Identifier [RFC4291] for an IEEE 802.15.4 interface may be based on the EUI-64 identifier [EUI64] assigned to the IEEE 802.15.4 device. In this case, th…
-
**_Reported by Gajinder Vij:_**
The Interface Identifier [RFC4291] for an IEEE 802.15.4 interface may be based on the EUI-64 identifier [EUI64] assigned to the IEEE 802.15.4 device. In this case, th…
-
**_Reported by Gajinder Vij:_**
Add support for context based IPv6 header compression and uncompression.
RFC 6282, Chapter 3.1.1 Base format, if SAC=1 and DAC=1.
Also 3.1.2 Context Identifier Exten…
-
**_Reported by Gajinder Vij:_**
LOWPAN_IPHC elides the IPv6 Next Header field when the NH bit is set to 1. This also indicates the use of 6LoWPAN next header compression, LOWPAN_NHC
(See RFC 6282, …
-
In the IPv6/6loWPAN stack there are sometimes statements like this: (e.g.: sys/net/gnrc/network_layer/ipv6/netif/gnrc_ipv6_netif.c:95ff)
```
mutex_unlock(&entry->mutex); /* function bel…
-
Our top level application requires to be signaled when the Ethernet link status has been changed (up/down).
So it would be great if we could subscribe on link up and down events.
Is this supported…
-
**_Reported by Gajinder Vij:_**
Add support for context based IPv6 header compression and uncompression.
RFC 6282, Chapter 3.1.1 Base format, if SAC=1 and DAC=1.
Also 3.1.2 Context Identifier Exten…
-
**_Reported by Gajinder Vij:_**
Add support for context based IPv6 header compression and uncompression.
RFC 6282, Chapter 3.1.1 Base format, if SAC=1 and DAC=1.
Also 3.1.2 Context Identifier Exten…